HID® MiniProx® 5365
125 kHz Mullion Mount Proximity Reader
Key Features
Typical Maximum Read Range
ProxCard® II Card – up to 5.5″ (14 cm)
ISOProx® II Card – up to 5″ (12.7 cm)
DuoProx® II Card – up to 5″ (12.7 cm)
Smart ISOProx®/DuoProx® cards – up to 5″ (12.7 cm)
Proximity & MIFARE® Card – up to 5″ (12.7 cm)
ProxCard Plus® Card – up to 2″ (5.1 cm)
ProxKey® II Keyfob – up to 2″ (5.1 cm)
MicroProx® Tag – up to 2.5″ (6.4 cm)
*Depending on local installation conditions.
Dimensions
6.0″ x 1.7″ x 1.0″(15.2 x 4.3 x 2.54 cm)
Power Supply
Standard MiniProx: 5-16 VDC
Haz. Loc. MiniProx: 5-16 VDC
Linear power supplies are recommended.
Current Requirements
Average: 30 mA (5 VDC); 20 mA (12 VDC)
Peak: 110 mA (5 VDC); 110 mA (12 VDC)
Operating Temperature
-22° to 150° F (-30° to 65° C)
Operating Humidity
0-95% relative humidity non-condensing
Weight
With terminal strip: 3.5 oz. (99 gm)
With pigtail: 3.8 oz. (108 gm)
Haz. Loc. MiniProx: 3.8 oz. (108 gm)
Cable distance
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG)
5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
Certifications
Canada/UL 294 Listed: Access Control System Units Canada/UL 1604 Listed (with Haz. Loc. junction box only): Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
FCC Certification, United States
Canada Certification
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN 300330 – SRD, and ETS 300 683 – EMC)
CE Mark
Australia C-Tick
New Zealand